Nice Automobiles, Luxury Car, Luxury Automotive, Elegant Car

Sunday, July 18, 2010

Toyota Land Cruiser V8, 2008

Toyota Land Cruiser V8, 2008






The new Land Cruiser V8, Toyota's top of the range model, is to make soon its debut on the European market. This eighth generation retains all the world-beating off-road capability of its predecessors but adds more refinement, comfort and superior driving quality.

The Land Cruiser chief engineer, Sadayoshi Koyari, explains the development theme of this new generation as follow: "For more than 50 years now three key words have been the basis of each generation of Land Cruiser: strength, durability and reliability. Therefore, rather than opting for revolutionary change, we decided to carry on the sense of trust in the Land Cruiser as the basic concept. With the latest generation we had to recognise the loyalty of Land Cruiser customers by providing a vehicle that will not betray their trust."

Built on a completely redesigned platform with a body-on-frame design, the length of the new model has been increased to 4950mm while the wheelbase has been kept to 2850 mm. The height varies between 1865mm and 1910mm depending on the suspension featured on the model, the width of the model is reaching 1970mm.

The new Land Cruiser will be available with a brand new 4.5 D-4D V8 diesel engine, combined with a new 6 speed automatic transmission, which develops an impressive 650 Nm from 1600 to 2800 rpm and 286 hp at 3600 rpm. This diesel engine has a fuel consumption of 10,2 L/100km, a 4% improvement versus the outgoing 4.2 TD L6 engine, based on the European combined cycle.

The model will be with an improved 4.7 VVT-i V8 petrol engine, combined with a 5 speed automatic transmission, which develops 445 Nm at 3400 rpm and 288 hp at 5400 rpm. This petrol engine has a fuel consumption of 14.4 L/100km, a 12% improvement, based on the European combined cycle. Both engines are fully compliant with Euro IV emissions regulations.

Advanced new technologies to make new Land Cruiser V8 a genuine:
* The world first Crawl Control system, available in combination with the petrol engine, which automatically controls the engine and the brakes to maintain a very low speed, avoiding spinning and locking. The driver only needs to steer the vehicle when driving in extreme off-road situations.
* The world first 4-Wheel Active Height Control and Adaptive Variable Suspension (4W AHC & AVS), which links all four wheels' suspension system for the first time and also provides a new spring rate control system.
* The European first Kinetic Dynamic Suspension System (KDSS), which actively operates the front and rear stabiliser bars based on a pair of hydraulic control cylinders.
* A newly developed centre Torsen Limited Slip Differential (LSD).

The new model will feature a wide range of advanced safety features like the newly developed Multi Terrain Anti-lock Brake System, the Vehicle Stability Control, the Electronic Brake-force Distribution and 14 Airbags.

Toyota FT-HS Concept, 2007

Toyota FT-HS Concept, 2007






The Toyota FT-HS hybrid sports concept.
The FT-HS incorporates hybrid capability while maintaining sports car essentials, such as a sleek profile, lightweight aero-dynamic materials, and an advanced high-output powertrain for revolutionary acceleration and optimal performance. This 21st century sports car is fun-to-drive with eco-friendly benefits such as ultra-low emissions and fuel efficiency. The FT-HS appeals to an emerging buyer who grew up eco-conscious and perceives technology as a necessity, not a luxury.

The two-plus-two concept is a front-engine, rear-drive sports car with a projected zero-to-60 acceleration in the four-second range. A powerful V6, 3.5L-engine is coupled with a 21st century sports hybrid system with a target power output of approximately 400-horsepower. At a mid-priced market position, FT-HS would be a true "attainable exotic" with 21st Century performance.

FT-HS expresses the core values of a Toyota Brand design strategy that combines two key elements: J-Factor and Vibrant Clarity. J-Factor refers to the local and global acceptance of Japanese-inspired design and cultural sensibilities. Vibrant Clarity is the design language used to express the J-factor much in the same way that L-Finesse is the language of the Lexus Division. It is the combination of perfect imbalance, freeform geometrics and integrated component architecture. The result of these three elements is subtractive mass, a minimalist style that is not only lightweight, but also looks lightweight.

The exterior design was led by Calty designer, Alex Shen. From a design perspective, the theme of the FT-HS achieves sleek, taut surfaces in its exterior features - especially in the doors and body style. The front and rear have been sculpted to remove mass around key functional components. Freeform geometrics define the integration of fluid surfaces contrasting hard-edge "Aero-Corners" which promote smooth airflow and reduce turbulence.

The roof has a distinctive scooped-out section designed to reduce aerodynamic drag and provide head room at the key areas. Made from carbon fiber Kevlar, the roof retracts so that the roof panel and back window pivot fluidly in a downward motion to stow in the rear seat space.

The vehicle's triangular profile has a floating "C" pillar, aero corners, a full upper-body pan, and innovative open top. A hood features a scalloped channel, exposing the hybrid engine. Integrated component architecture can be seen in the aerospace-inspired lighting. The tail lamp unit spans the entire rear, and has an integrated retractable spoiler. Light-emitting diode (LED) clusters are located in the headlamps and the wing for energy-efficiency and decreased heat loss. Other exterior features include a speed-activated wing that elevates at high speed for additional stability and traction. The rear showcases a carbon fiber lower diffuser with integrated wide exhaust and carbon fiber wheels.

The driver-oriented interior was created by Calty designer, William Chergosky and exudes sleekness, technology, and performance. The lean skeletal look is achieved with exposed cross-car architecture and high-tech materials such as carbon fiber, and titanium. FT-HS' interior features create a dedicated driver's cockpit which include subtractive mass expressions such as cross-car instrument panel structure and delta wing driver pod. The delta-wing driver's pod integrates many useful functions into a lightweight structural unit. All of the important functions and details are presented almost exclusively to the driver. For example, touch-trace sensors which surround the driver and act as tactile guides for finger controls when traveling at high speeds.

By eliminating the "B" pillar and creating a suspended "C" pillar, the minimalist style works in conjunction with subtractive mass. An integrated instrument panel surrounds the driver, creating an enclosed pod effect. Armrests flow seamlessly into the door and surrounding interior.
Seating is optimized for a lightweight appearance and function: the seating accommodates four and then coverts to a two-seater when the roof retracts. The passenger-seat area is open with a simple exposed airbag on the cross-car beam.
A telescoping hub-less steering wheel incorporates semi-automatic paddle shifters and allows the meter to be shifted forward in order to shorten the driver's focus-time between the road and meter, and ultimately enhance driver focus.

DIMENSIONS (inches)
* Overall Length: 170.27
* Overall Width: 73.23
* Overall Height: 50.79
* Wheelbase: 104.33

Wheels: Carbon Fiber
Tire Sizes: Front 245/35R21 Rear 285/30R21